PRS-S-0500-D1-TM1M12熱電阻 美國omega熱電阻

 PRS-S-0500-D1-TM1M12熱電阻 美國omega熱電阻

3-A經過批準的衛生探頭，帶一體式變送器和M12連接器
PRS-TMM12 Series
新產品!
3-A經過批準的衛生探頭，帶一體式變送器和M12連接器
PRS-TMM12 Series:3-A經過批準的衛生探頭，帶一體式變送器和M12連接器
PRS-S-0300-D1-TM1M12
4-Pin M12 Male Connector Standard. An M12 Extension Cable is Required for Installation.
3-A Approved RTD Sensor With Integral Transmitter
Available with Standard or Heavy-Duty Stepped Probe
3", 4", 5" and 6" Standard Lengths, Others Available
1½" 16 AMP Tri-Grip™ (Tri-Clamp® Compatible) Fitting Standard
316L SS Wetted Surfaces with 32 µin or Better Surface Finish
Two Transmitter Ranges:
-1 for -40 to 49°C (-40 to 120°F) and
-2 for -18 to 93°C (0 to 200°F)
-50 to 200°C (-58 to 392°F) Sensing Temp Range
85°C (185°F) Max Connector Temp
Note: These Sensors Require an M12 Extension Cable to Connect the Sensor To Your Instrumentation. A Partial List Of Our M12 Extension Cables is Included in the Ordering Table Below.
3-A approved The 3-A Approved OMEGA® PRS-TMM12 series transducers are designed for use in Sanitary or Hygienic Clean-in-Place applications in the Food, Dairy, Beverage and BioPharmaceutical industries. These transducers are
 

manufactured with 316L stainless steel housings that meet the dimensional and finish requirements of 3-A Standard 74-05 and ASME BPE-2007, and are welded and processed to provide a clean, smooth, 32 microinch or better surface finish in the wetted areas for Clean-in-Place processes.
The probe stems are manufactured in two configurations; standard duty probes with a ¼" diameter probe, and a heavy duty design with a stepped 3/8" to 3/16" diameter probe design for good response times.
The OMEGA® PRS-TMM12 series transducers are identical to the PRS-M12 RTD sensors except for the addition of a built-in 4 to 20 mA transmitter inside the housing. This eliminates the need for a separate transmitter when a 4 to 20 mA
 

signal is required for your instrumentation. The housing cover can be removed allowing for the adjustment of the transmitter's zero and span settings.
There are two ranges offered as standard offerings:
The TM1M12 model ranged to provide a 4-20 milliamp output between -40 and 49°C (-40 to 120°F),
The TM2M12 model ranged to provide a 4-20 milliamp output between -18 and 93°C (0 to 200°F).
Other ranges are available as special orders, please consult our sales engineers.
A 4-Pin M12 Connector provides a quick and convenient connection point for process wiring. Simply install an M12 extension cable to the sensor to connect it to your monitoring or control instrumentation.
Wiring Diagram
Sanitary Temperature Sensor Specifications Include:
316L stainless steel process wetted surfaces with surface finishes of 32 microinches or better.
Probe lengths of 3, 4, 5 or 6 inches available from stock, other lengths available as special orders.
Standard mounting flange is 1½"-16AMP Tri-Grip™ in conformance with ASME BPE-2007.
4-Pin, M12 Connector.
Thermal response time of 2.5 seconds or less in water flowing at 3 ft/sec (63% response).
4 to 20 milliamp output proportional to temperature (see ranges available).
Supply Voltage 8 to 35VDC, 24VDC recommended.
Maximum temperature range is -50 to 200°C at the sensing end, 85°C max at the connector end.
 

產品型號/產品描述
-40 to 49 deg C (-40 to 120 deg F)
PRS-S-0300-D1-TM1M12 3 in Long Standard Duty Probe
PRS-S-0400-D1-TM1M12 4 in Long Standard Duty Probe
PRS-S-0500-D1-TM1M12 5 in Long Standard Duty Probe
PRS-S-0600-D1-TM1M12 6 in Long Standard Duty Probe
PRS-H-0300-D1-TM1M12 3 in Long Heavy Duty Probe
PRS-H-0400-D1-TM1M12 4 in Long Heavy Duty Probe
PRS-H-0500-D1-TM1M12 5 in Long Heavy Duty Probe
PRS-H-0600-D1-TM1M12 6 in Long Heavy Duty Probe
-18 to 93 deg C (0 to 200 deg F)
PRS-S-0300-D1-TM2M12 3 in Long Standard Duty Probe
PRS-S-0400-D1-TM2M12 4 in Long Standard Duty Probe
PRS-S-0500-D1-TM2M12 5 in Long Standard Duty Probe
PRS-S-0600-D1-TM2M12 6 in Long Standard Duty Probe
PRS-H-0300-D1-TM2M12 3 in Long Heavy Duty Probe
PRS-H-0400-D1-TM2M12 4 in Long Heavy Duty Probe
PRS-H-0500-D1-TM2M12 5 in Long Heavy Duty Probe
PRS-H-0600-D1-TM2M12 6 in Long Heavy Duty Probe
Accessories
M12C-PUR-4-S-F-2 Extension cable with straight 4-pin female M12 mating connector and polyurethane jacketed cable 2 meters (6.5') long.
M12C-PVC-4-S-F-5 Extension cable with straight 4-pin female M12 mating connector and PVC jacketed cable 5 meters (16.4') long.
M12C-PUR-4-S-F-5 Extension cable with straight 4-pin female M12 mating connector and polyurethane jacketed cable 5 meters (16.4') long.
M12C-PUR-4-R-F-2 Extension cable with a right angled 4-pin female M12 mating connector and polyurethane jacketed cable 2 meters (6.5') long.
M12C-PVC-4-R-F-5 Extension cable with a right angled 4-pin female M12 mating connector and PVC jacketed cable 5 meters (16.4') long.

注釋: Please consult sales for other flange diameters, styles and probe lengths. For probe lengths longer than 6", change "-0600" in model number to the required length (example: 12" = "-1200", 9¼" = "-0925") and add $2.50 per inch to the price (up to 24 inches).
訂購示例: (1) PRS-S-0400-D1-TM1M12 Sanitary sensor with a 1/4" diameter, 4" long probe, 1-1/2"-16AMP mounting flange and integral transmitter ranged for -40 to +49°C (-40 to 120³F) Operation,

產品型號說明
(1) (2) (3) (4)
PRS-
-
-
-
Qty: Add To Shopping Cart
選項描述
(1) Probe Type
選擇
S 代表 Standard Duty 1/4" Diameter
H 代表 Heavy Duty Stepped 3/8" to 3/16" Diameter
(2) Length
選擇
0300 代表 3" Probe
0400 代表 4" Probe
0500 代表 5" Probe
0600 代表 6" Probe
(3) Flange Size
選擇
B1 代表 3/4" Flange
D1 代表 1 1/2" Flange
E1 代表 2" Flange
F1 代表 2 1/2" Flange
G1 代表 3" Flange
H1 代表 4" Flange
(4) Transmitter with M12 Plug Connection
選擇
TM1M12 代表 -40 to 49C Temperature Range
TM2M12 代表 -18 to 93C Temperature Range
 

 PRS-S-0500-D1-TM1M12熱電阻 美國omega熱電阻