進口杠桿浮球式蒸汽疏水閥

進口杠桿浮球式蒸汽疏水閥，Lever ball float type steam trap是利用浮力原理和杠桿原理，通過液位的變化使浮球上升或下降，浮球驅動著杠桿使得閥瓣離開或接觸閥座達到開啟排水和關閉阻汽的作用。采用自動排空氣閥，能自動排除不凝結氣體，非常靈敏，工作質量高，使用壽命長。連續排水，有水即排，zui小過冷度為 0℃。進口杠桿浮球式蒸汽疏水閥采用兩種結構方式 A：?jiǎn)伍y座-杠桿浮球; B：雙平衡閥座-杠桿浮球。
  單閥座：需要克服介質壓力對閥座的作用，閥座的孔徑不能很大，適用于小型設備、伴熱管線，蒸汽主管等排水小的場合。閥座孔設計在凝結水水位以下，自然形成水封，水、汽自然分離，達到無蒸汽泄漏，即便沒有凝結水采用球型密封的杠桿使得閥瓣緊貼閥座，達到無新鮮蒸汽的泄漏。不受凝結水量波動和溫度的影響。
  雙平衡閥座：該閥利用雙閥孔設計，介質的壓力對兩個閥座作用相等，方向相反，介質壓力對閥座作用相抵消，閥芯在開閥時壓力相對減少，從而獲得超大排量。工作時浮球隨閥腔內液體位的變化而上下浮動，帶動杠桿打開或關閉閥座。由于閥座孔在凝結水水位以下，形成水封，水、汽自然分離，達到無蒸汽泄漏。不受壓力、溫度、冷凝水流量波動的影響。
德國托克TOK品牌：用途：
杠桿浮球式蒸汽疏水閥，廣泛用于工業蒸汽加熱設備，各種大型熱交換器及干燥機、夾套鍋等，特別應用于冷凝水特大排量在的工作場合。

杠桿浮球式蒸汽疏水閥特點：
此超大排量型蒸汽疏水閥，在整個工作壓力范圍內無需調整和更換內件，即可充分排除大量的疑結水。排水過冷度可達0℃，特別適合用于疑結水量大的工作場合。
(A) the use of lever ball float steam trap:
Lever Ball Float Steam Traps are widely used for industrial steam heating equipment, heat exchangers and a variety of large dryers, folder jacketed kettle, etc., especially used in large displacement of water condensation in the workplace.
(B) Leverage Ball Float Steam Trap features:
This large displacement type steam trap, the entire operating pressure range without adjustment and replacement of parts, can be fully ruled out a large number of suspected knot water. Drainage undercooling up to 0 ℃, especially for a large amount of water used for suspected knot workplace.                                         
杠桿浮球式蒸汽疏水閥結構特點及工作原理： http://www.020valve。。ｃｏｍ
1、采用軋裝閥機械(新SCCV開關方式)，具有優良的密封性和耐久性。
2、平衡雙閥座設計，比一般的疏水閥體積小而排量大，特大排量場和更能發揮*性。
3、內裝雙金屬片空氣自動排放閥，可防止空氣氣堵和蒸汽汽鎖。
4、采用*的U型雙金屬通氣口，可大大縮短設備起動時間。
5、全部部件安裝在閥蓋上，閥無需從配管上卸下，就可維修保養，簡單方便。
Lever Ball Float Steam Traps structural characteristics and working principle of:
1, using the mechanical rolling Valve (New SCCV switch mode), with excellent sealing and durability.
2, balanced two-seat design, trap size than the average small and large displacement, large displacement field and play more advantages.
3, built-in bimetal automatic air relief valve to prevent air and steam vapor lock gas block.
4, the unique U-shaped bi-metallic vent, can greatly reduce device startup time.
5, all the components installed in the valve cover, valve without removing from the piping on, you can repair and maintenance, easy and convenient.