北京賽斯維測控技術有限公司

主營產品: 壓力傳感器,加速度傳感器,振動傳感器,氣壓傳感器,位移傳感器

12

聯系電話

18610087636

您現在的位置: 首頁> 供求商機> LDT0壓電薄膜傳感器-LDT0壓電薄膜傳感器

公司信息

聯人:
劉敏
話:
01084775646/8
機:
18610087636
真:
01058949029
址:
北京望京西路甲50號卷石天地大廈B座1001
編:
100102
網址:
www.sensorway.cn
鋪:
http://m.true-witness.com/st18474/
給他留言
[供應]LDT0壓電薄膜傳感器-LDT0壓電薄膜傳感器
LDT0壓電薄膜傳感器-LDT0壓電薄膜傳感器
貨物所在地:
北京北京市
更新時間:
2024-12-17 21:00:21
有效期:
2024年12月17日--2025年6月17日
已獲點擊:
154
【簡單介紹】典型應用: 汽車防盜報警器,臥式滾筒洗衣機振動,電子靶,計數器觸發器 ,生命特征的監護
【詳細說明】

產品說明:

 

LDT0壓電薄膜傳感器:The ‘L’ in LDT Series stands for ‘laminated’ sensor. Typically, a 0.005” (125μm) polyester layer is laminated to a 28 μm or 52μm piezo film element. When used in a ‘bending’ mode, laminated film elements develop much higher voltage output when flexed than a non-laminated DT elements series. The neutral axis is in the laminate instead of in the film so the film is strained more when flexed. The capacitance is proportional to the area and inversely proportional to the thickness of the element. Piezo film sensors LDT elements are available in a variety of lead attachment options. For significantly increased sensitivity, the LDTM-028K (M-Mass) combines an LDT0-028K form factor with the addition of a 0.72 gram round mass. The LDT1, 2 and 4 have 12” of 26 gauge twisted pair wire. The LDT0-028K and LDTM-028K with solder tabs can be soldered directly to a PCB with areasonable level of care. Piezo film cannot withstand high temperatures (>80°C),andthereforesoldering of the pins to a PCB must be done quickly. A heatsink clamped to the interface area between the film and the crimps will take the heat away from the film. Pre-tin thePCBandthenquickly solder the sensor to the board. Do not allow the soldering iron to touch the film, and do not use a dwell time of over 5 seconds on the pins. Low temperature solders can also be used. For tightly tolerance sensitivity requirements, please consult MeasurementSpecialties for techniques used to control variations of boundary conditions in production.

 

所屬品牌: MEAS
輸出: 高電壓輸出
量程: -
封裝:薄膜元件
工作溫度范圍: 0~70℃
精確度:1.4V/g~16V/g
供電電源:無源
特點:寬頻(0.001Hz~1000MHz),高靈敏度,高介電強度,低聲阻抗,高穩定性
類型:壓電薄膜懸臂梁質量塊
電氣連接: PC板安裝
典型應用: 汽車防盜報警器,臥式滾筒洗衣機振動,電子靶,計數器觸發器 ,生命特征的監護
資料下載:http://www.sensorway。。cn/sensors/118.html



產品對比 產品對比 二維碼 在線交流

掃一掃訪問手機商鋪

對比框

在線留言