he universal cover clamps CR1800

he universal cover clamps CR1800

he universal cover clamps CR1800

通用蓋夾CR1800有4個位置，允許堆疊多達3或4個淺或半深微孔板+蓋（因此每個全夾多12或16個板）。蓋夾可以安裝在一系列供應商提供的軌道振動平臺上。自2013年3月以來，所有通用卡箍都配備了改進的擰緊系統。十字螺母可以更容易地?cái)Q緊，彈簧系統將施加的力限制在400牛頓左右，這非常適合帶固體硅膠的三明治蓋。對于海綿狀硅酮夾心蓋，我們建議先大限度地?cái)Q緊夾鉗系統，然后松開十字螺母半圈或全圈（180-360度）。在大多數振動平臺上，可以連續安裝4個夾鉗，因此可以孵化48或64個微孔板+蓋。自2014年以來，我們還提供4位夾具和稍大一點的接地板，可以夾在Kuhner振動篩的EPFL臺上（訂單號：CR1800c）。我們還提供2位通用蓋夾具（CR1600）

he universal cover clamps CR1800 have 4 positions and allow the stacking of up to three or four shallow or half-deepwell microplates + covers (hence a maximum of 12 or 16 plates per full clamp). The cover clamp can be mounted on orbital shaking platforms from a range of suppliers. Since March 2013, all universal clamps are equipped with an improved tightening system. The cross-nut allows easier tightening, and a spring-system limits the force excerted to ~400 Newton, which is perfect for sandwich covers with solid silicone. For sandwich covers with spongy silicone, we advice to first tighten the clamp system maximally, but then to release the cross-nut a half or full turn (180-360 degrees).On most shaking platforms, 4 clamps can be mounted in a row, so allowing the incubation of 48 or 64 microplates + covers.Since 2014, we also supply such 4-position clamps with a slightly larger groundplate, that allows clamping onto EPFL tables from Kuhner shakers (order number: CR1800c).We also supply universal cover clamps with 2 positions (CR1600)

注：楊清辰發布