您好, 歡迎來到化工儀器網! 登錄| 免費注冊| 產品展廳| 收藏商鋪|
當前位置:上海隆繼金屬集團有限公司>>技術文章>>1.1121對應牌號
Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for thepurpose of finishing the heat. Steels with improved machinability as a result of the addition of lead or higher sulfur contents, depending on the manufacturing process up to around 0.1 % S, may be supplied on request. In this case, the upper limit of the manganese content may be increased by 0.15 % |
C | Si | Mn | P | S |
0.07 - 0.13 | max 0.4 | 0.3 - 0.6 | max 0.035 | max 0.035 |
Rm - Tensile strength (MPa) (+A) | 430 |
Rm - Tensile strength (MPa) (+CR) | 830 |
Rp0.2 0.2% proof strength (MPa) (+A) | 345 |
A - Min. elongation Lo = 80 mm (%) (+A) | 26 |
Brinell hardness (HBW): (+A) | 131 |
Brinell hardness (HBW): (+N) | 85 - 140 |
Rockwell B hardness ( HRB or RB): (+A) | 73 |
Vickers hardness ( HV): (+) | 135 |
Vickers hardness ( HV): (+CR) | 250 |
Weldability: It is a soft carbon-steel, easily cold machinable and weldable without any particular precautions. |
EU EN | Germany DIN,WNr | France AFNOR | England BS | Italy UNI | Spain UNE | Russia GOST | Inter ISO | |||||||||||||
C10E |
|
|
|
|
|
|
|
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,化工儀器網對此不承擔任何保證責任。
溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。