您好, 歡迎來到化工儀器網
5180-4169O-Ring 12/PK, Fluoroelastomer, 0.176inID
5181-1246Dissolution filter, 1/8in probe, 1000/pk
5181-3311Washer, spring 10/PK
5181-3389Outlet splitter
5181-3390Fixed inlet splitter 0.22mm id
產品分類品牌分類
-
臺式大容量冷凍離心機 臺式低速自動平衡離心機轉子 臺式高速冷凍離心機 臺式高速冷凍離心機轉子 高速冷凍離心機轉子 冷凍離心機轉子 低速離心機角轉子 自動脫蓋離心機 自動脫帽離心機 檢測離心機 血型卡專用離心機 自動平衡離心機 乳脂離心機 臺式高速離心機 高速冷凍離心機 落地式離心機 臺式離心機 高效離心機 離心機轉頭指南 高速大容量離心機 微型離心機 真空離心機 微波萃取儀 濃縮儀 固相萃取儀 旋轉離心機 高速離心機 血液離心機 迷你離心機 低速離心機 超速分離系統 冷凍離心機 離心機 真空離心濃縮儀 干燥箱/培養箱 秒表/計時器 旋轉蒸發儀 水循環真空泵 分析天平 PH計 周邊設備
產品簡介
詳細介紹
安捷倫原子吸收AA配件
| 5180-4169 | O-Ring 12/PK, Fluoroelastomer, 0.176inID |
| 5181-1246 | Dissolution filter, 1/8in probe, 1000/pk |
| 5181-3311 | Washer, spring 10/PK |
| 5181-3389 | Outlet splitter |
| 5181-3390 | Fixed inlet splitter 0.22mm id |
| 5181-3391 | Fixed inlet splitter 0.32mm id |
| 5181-3392 | Fixed inlet splitter 0.53mm id |
| 5181-3393 | Variable outlet |
| 5181-8837 | Packed injection port kit |
| 5181-8863 | Source cleaning kit |
| 5182-0746 | Conversion Kit to use 3/4" (150mm) tube |
| 5182-0772 | Heat assembly, trap |
| 5182-0773 | Stainless steel trap, BTEX |
| 5182-0774 | Trap, BOCARB 4000 |
| 5182-0775 | Trap, VOCARB 3000 |
| 5182-0778 | Trap, OV-1/Tenax/Silica/Gel |
| 5182-0779 | Trap, OV-1/Tenax/Silica Gel/Charcoal |
| 5182-0780 | Trap, Tenax/Charcoal |
| 5182-0781 | Trap, Tenax/Silica Gel/Charcoal |
| 5182-0783 | Trap, Tenax |
| 5182-0788 | Needle, 7.75in for 5ml frit/fritlss sprg |
| 5182-0789 | Smpl Ndl for 25ml frit/fritless sparger |
| 5182-0792 | Female Luer connector for sample valve |
| 5182-0793 | Sample Valve, 3 port, assembly |
| 5182-0794 | 25ml Needle Sparger Kit |
| 5182-0795 | 5ml Needle Sparger Kit |
| 5182-0796 | 25ml Fritless Sparger Kit |
| 5182-0844 | 5ml Fritless Sparger Kit |
| 5182-0845 | 25ml Sparger Kit |
| 5182-0846 | 5ml Frit Sparger Kit |
| 5182-0847 | 25ml Needle Sparger |
| 5182-0848 | 5ml Needle Sparger (Glassware Only) |
| 5182-0849 | 25ml Fritless Sparger (Glassware Only) |
| 5182-0850 | 5ml Fritless Sparger (Glassware Only) |
| 5182-0851 | 25ml Frit Sparger (Glassware Only) |
| 5182-0852 | 5ml Frit Sparger (Glassware Only) |
| 5182-0893 | Sparger, fritted, 5ml, 3/4" (Glswr only) |
| 5182-0894 | Sparger,25ml,frit,3/4" (Glassware only) |
| 5182-0895 | Sparger,5ml,fritless,3/4" (Glswr only) |
| 5182-0896 | Sparger, 25ml, fritless, 3/4" Glassware |
| 5182-2581 | APG remote cable |
| 5182-3477 | TCD Back Ferrule for 1/8" inlet 10/PK |
| 5182-9652 | S/SL Gold Seal Disk with Cross |
| 5182-9673 | TCD Frnt Ferr for 0.53mm id col 10/PK |
| 5182-9676 | TCD Frnt Ferr for 0.32mm id col 10/PK |
| 5182-9677 | TCD Frnt Ferr for 0.25mm id col 10/PK |
| 5182-9679 | TCD Front Ferrule, no hole 10/PK |
| 5182-9722 | 6890 NPD Ceramic Insulator/Metal Seal KT |
| 5182-9747 | Service Kit for SLH |
| 5182-9748 | PTFE guide for SLH, 10/PK |
| 5182-9753 | Empty inserts with one swirl hole 10/PK |
| 5182-9754 | Graphpack-2M connector 0.2mm |
| 5182-9755 | PTV Septumless Head for 6890GC |
| 5182-9757 | VAlve body for SLH |
| 5182-9758 | Spring for SLH |
| 5182-9759 | Kalrez seal for SLH |
| 5182-9760 | Sealing element for SLH |
| 5182-9761 | Graphpack-2M connector 0.32/0.25mm |
| 5182-9762 | Graphpack-2M connector 0.53mm |
| 5182-9763 | Silver seal 5/PK |
| 5182-9773 | TV Gas Connection Kit |
| 5182-9775 | Viton Seal for SLH Septumless Head 5/PK |
| 5182-9788 | Pkd con Tube Tenax TA a-ty 1arrow 36PK |
| 5182-9789 | Pkd con Tube Tenax TA b-ty 2arrow 36PK |
| 5183-0362 | Declaration of Conformity |
| 5183-2096 | HP5973 w/Diffusion Pump 1 Yr Maint Kt |
| 5183-4649 | Crossover Ethertwist Cable, 10ft |
| 5183-4652 | MIcro GC Replacement Filters 5/PK |
| 5183-4735 | Sparger 25ml Frit for 3000/2000/7695 |
| 5183-4736 | Sparger 5ml Frit for 3000/2000/7695 |
| 5183-4737 | Sparger 5ml Fritless for 3000/2000/7695 |
| 5183-4738 | Sparger 25ml Fritless for 3000/2000/7695 |
| 5183-4745 | Interface Cbl 5890 to 7695/TMR-3100 P+T |
| 5183-4746 | Intf Cable 5890 MSD-7695/TMR-3100 P+T |
| 5184-3517 | GC/MS Checkout Standards Kit |
| 5188-1447 | Trap, U Sha Tenax Stamp 1A |
| 5188-1448 | Trap, U Sha VPH Stamp 11 |
| 5188-2790 | Trap, Tenax () |
| 5188-2791 | Trap,Tenax/Silica gel/char 12inx18in No3 |
| 5188-2792 | Trap, Tenax/charcoal, 12? x 1/8" (No.4) |
| 5188-2793 | Trap, OV-1/Tenax/Silica gel,12"x1/8"(6) |
| 5188-2794 | Trap,OV-1/Tenax/Sil gelchar,12"x1/8"(5) |
| 5188-2795 | Trap, VOCARB 3000 |
| 5188-2796 | Trap, VOCARB 4000 |
| 5188-2797 | Trap, BTEX |
| 5188-5241 | S/SL Insulation Kit, 3 Pieces |
| 5188-5244 | Response Linearity Standard, 3x1 mL amp |
| 5188-5245 | FPD Sample |
| 5188-5347 | OFN NCI Checkout standard 100 fg/uL |
| 5188-5348 | OFN EI Checkout standard 1 pg/uL |
| 5188-5357 | PFHT - HighMass Checkout Sample |
| 5188-5372 | FID MDL test sample 3x0.5 ml ampoules |
| 5188-5953 | FPD Check Out Sample, Meth. Parathion |
| 5188-6493 | QuickPick Split Inlet PM Kit |
| 5188-6494 | QuickPick Splitless Inlet PM Kit |
| 5188-6495 | Split vent trap PM kit,single cartridge |
| 5188-6496 | QuickPick Split Vent + Inlet PM Kit |
| 5188-6497 | QuickPick Splitless Inlet/Vent PM Kit |
| 5188-6498 | QuickPick Purged Packed Inlet PM Kit |
| 5188-6523 | Sulfa Drug LCMS OQPV Standards kit |
| 5188-6524 | PA tuning solution set |
| 5188-6525 | ICP-MS internal Std Mix |
| 5188-6526 | 6020 Interference Check Solution A 100ml |
| 5188-6527 | 6020 Interference Check Solution B 100ml |
| 5188-6529 | RRLC Check out sample, 1mL ampoule |
| 5188-8813 | Trap,BTEX + MTBE |
| 5188-8814 | Trap (No. 5),OV-1/Tenax/Silica Gel/Char |
| 5188-8815 | Trap (No. 8),Carbopak B/Carbosieve S-III |
| 5188-8816 | Trap (No. 9),Proprietary |
| 5188-8817 | Trap,Tenax/Silica Gel/Carbosieve S-III |
| 5188-8818 | Strat-Trap,Tenax/Silica Gel No. 2 |
| 5188-8819 | Strat-Trap,Tenax/Silica Gel/Charcoal No3 |
| 5188-8820 | Trap,VOCARB 3000 |
| 5188-8821 | Trap,VORCARB 4000 |
| 5188-8822 | Trap,BTEX |
| 5190-0123 | Electron Multiplier for 8800 ICP-MS/MS |
| 5190-0469 | LC TOF/QTOF/Q sticide Test Mix. |
| 5190-0482 | ASTM D6591-06 IP 548 Calib Std Lit 4x1ml |
| 5190-0483 | ASTM D6591-06 IP548/06 sys cal std 1,2 |
| 5190-0484 | EN12916/ IP 391 Calib.Sols A-D 4x 1ml |
| 5190-0485 | EN12916/ IP391 Sys Cal Std 1+2 2x 1ml |
| 5190-0489 | Nitrosamine Checkout Mix 10 ug/L in MeOH |
| 5190-0490 | Residual Solvent Revised Mthd467 Class 1 |
| 5190-0519 | RGA Checkout Sample with Oxygen |
| 5190-0521 | Greenhouse Gas Checkout Sample |
| 5190-0522 | Quinine Standard for FLD |
| 5190-0530 | Cell cleaning sol for UV/VIS 1L |
| 5190-0531 | IRM calibrant for GC/TOF 1 x 0.5mL |
| 5190-0551 | LC/MS sticide Comprehensive mix 8x 1mL |
| 5190-0553 | Vet drug checkoutmix 1mL |
| 5190-0556 | LC/MS forensic tox checkout mix |
| 5190-0557 | Tox comprehesive test submix 1 1mL |
| 5190-0558 | Tox comprehesive test submix 2 1mL |
| 5190-0559 | Tox comprehesive test submix 3 1mL |
| 5190-0560 | Tox comprehesive test submix 4 1mL |
| 5190-0561 | Tox comprehesive test submix 5 1mL |
| 5190-0562 | Tox comprehesive test submix 7 1mL |
| 5190-0563 | Tox comprehesive test submix 8 1mL |
| 5190-0565 | Tox comprehesive test submix 6 1mL |
| 5190-0569 | Vet Drug submix 1 1mL |
| 5190-0570 | Vet Drug submix 2 1mL |
| 5190-0571 | Vet Drug submix 3 1mL |
| 5190-0572 | Vet Drug submix 4 1mL |
| 5190-0573 | Vet Drug submix 5 1mL |
| 5190-0574 | Vet Drug submix 6 1mL |
| 5190-0575 | Vet Drug submix 7 1mL |
| 5190-0576 | Vet Drug submix 8 1mL |
| 5190-0577 | Vet Drug submix 9 1mL |
| 5190-0578 | Vet Drug submix 10 1mL |
| 5190-0580 | Entprise Edtn LCMS OQ/PV sulfa std 5x2mL |
| 5190-0591 | ESI Negative Ion rformance Std |
| 5190-0921 | Sapphire Window |
| 5190-1401 | Cleaning Powder,Dielectric Capillary |
| 5190-1441 | sticide Locking Standard 3 x 1ml |
| 5190-1445 | Strat-trap, OV-1/Tenax (No. 7) |
| 5190-1446 | Strat-trap, Tenax (No. 1) |
| 5190-2231 | 25 mL fritless Sparge Glssware Kit Atomx |
| 5190-2232 | 25 mL frit Sparge Glassware Kit, Atomx |
| 5190-2233 | Vessel, 15 mL Amber IS |
| 5190-2234 | Syringe, 27 mL with Side Port |
| 5190-2235 | Antifoam agent, Antifoam 1520, 10 mL |
| 5190-2265 | Sample loop, 1mL certified, deactivated |
| 5190-2266 | Sample loop, 3 mL certified, deactivated |
| 5190-3151 | Sample loop, 5 mL, EK AQUATek 100 |
| 5190-3152 | Sample loop, 25 mL, EK AQUATek 100 |
| 5190-3153 | Sample loop, 20 mL, EK AQUATek 100 |
| 5190-3154 | Sample loop, 10 mL, EK AQUATek 100 |
| 5190-6144 | Gold Seal, Ultra Inert, w/Washer |
| 5190-6145 | Gold Seal, Ultra Inert, w/Washer, 10/PK |
| 5190-6149 | Gold Seal, Ultra Inert, w/Washer, 50/PK |
| 5190-6166 | Vet drugs LC/MS standard submix 11 1x1ml |
| 5410029700 | Carousel disc, PSD 100 autosampler, 1/pk |
| 5410046300 | Disc carousel PSD 120, 130 samples, 1/pk |
| 5610121600 | Mercury source lamp, Liberty ICP, 1/pk. |
| 5982-0024 | Butanetriol Int Std Num.1 for Biodiesel |
| 5982-0025 | Tricaprin Int Std Number 2 for Biodiesel |
| 59987-20040 | Precision glass capillary,platinum ends |
| 6210092090 | Moulding Spraychamber Fluorinated |
| 6310001100 | Graphite tubes, plateau, coated, 10/pk |
| 6310001200 | Graphite tubes, partitioned, 10/pk |
| 6310001300 | Graphite pyrolytic platforms, 10/pk |
| 6310001600 | Graphite electrodes Deuterium GFAA, 1 Pr |
| 6310001700 | Graphite electrodes, Zeeman GFAA 1 Pair |
| 6310001800 | Graphite shroud Deuterium GFAA, 1/pk |
| 6310001900 | Graphite shroud, Zeeman GFAA 1/pk |
| 6310003100 | Graphite shroud for GTA 120, 1/pk |
| 6310003400 | Graphite electrodes for GTA 120, 1 pair |
| 6310003500 | Graphite electrodes GTA120 Zeeman 1 pair |
| 6310003600 | Graphite shroud for GTA120 Zeeman, 1/pk |
| 6310003700 | Graphite tubes, Omega platforms, 10/pk |
| 6610011400 | Drain vessel, SPS-5 with Diluter, 1/pk |
| 6610011600 | Plastic reagent vessel and cap 500mL 1/p |
| 6610011800 | Rinse reservoir for SPS 3,10 L, 1/pk |
| 6610016900 | Replacement abs. cell, Hg Analyzer, 1/pr |
| 6610017500 | Drip tray, AA sample compartment, 1/pk. |
| 6610020500 | Cary 50 dissolution tubing spares kit |
| 6610023000 | Microplate 384 well white hi-bind 100/pk |
| 6610023700 | Flow cell fluor, 10mm 40uL 1/pk |
| 6610023900 | Ultra-micro cell quartz, 1mm 8uL. 1/pk |
| 6610024000 | Sub-micro cell, quartz, 5mm, 40uL. 1/pk |
| 6610024100 | Sub-micro cell, quartz, 10mm, 80uL. 1/pk |
| 6610024200 | Sub-micro cell fluor, UV 10mm 40uL. 1/pk |
| 6610025100 | Spill tray,440 SPS3,1/pk |
| 6610025400 | SPS3 sample rack 60 tubes x 16mm od 1/pk |
| 6610025500 | SPS3 sample rack 40 tubes x 20mm od 1/pk |
| 6610026000 | Overlay for 40 place rack, 18 mm OD tube |
| 6610026100 | Overlay for 60 place rack, 13 mm OD tube |
| 6610026400 | SPS3 sample rack 90 tubes x 13mm od 1/pk |
| 6610026500 | SPS3 sample rack 24 tubes x 25mm od 1/pk |
| 6610026600 | SPS3 sample rack 21 tubes x 30mm od 1/pk |
| 6810008700 | Filter drierite - small |
| 6810009500 | Filter Flow Path outlet of mixer 8101031 |
| 6810009600 | Filter, solvent (40), 1/pk |
| 6818000600 | Replacement filter glass, Holmium Oxide |
| 6910001200 | O-ring (1/4 id x 3/8 od x 1/16)in |
| 6910004000 | O-ring nitr (1/16 id x 7/8 od x 3/32)in |
| 6910008200 | Neb bung O-ring , 7/32in id x 11/32in od |
| 6910009800 | O-ring 3/16 in id x 5/16 in od x 1/16 in |
| 6910010500 | O-ring spray chamber bung, nitrile. 1/pk |
| 6910013600 | O-ring 3/16 in id x 5/16 in od x 1/16 in |
| 6910048090 | Syringe valve seal, 1/pk |
| 6910048700 | Seal,pumphead,quaternary,1/pk |
| 7010017100 | Drip tray for VGA 77, 1/pk |
| 7010017200 | Base plate, VGA77 AA hydride module 1/pk |
| 7210018900 | Graphite tube removal tool |
| 7210035500 | Filter 1 ABS Agilent AA certified, 1/pk |
| 7910019800 | IEEE cable, 4 m, metal covers, 1/pk |
| 7910028900 | Fiber optic probe lite shield Cary 1/300 |
| 7910033500 | Test tube holder, Cary 50/60, 1/pk |
| 7910043700 | ICP s/chamber double-pass glass cyclonic |
| 7910044400 | Torch body fully demountable, axial ICP |
| 7910044500 | Torch body fully demountable, radial ICP |
| 7910046300 | RS232 data cable w/DB9 m-f connector, 5m |
| 7910050700 | Torch one piece, ball joint ax 2.3mm inj |
| 7910051290 | Transfer tube FEP cycl s/c on radial ICP |
| 7910051490 | Transfer tube inert SM s/c on radial ICP |
| 7910051590 | Transfer tube FEP fm s/chamber axial ICP |
| 7910052500 | ICP spray chamber, Twister + Helix, 1/pk |
| 7910052600 | ICP s/chamber, Twister+Helix+Ball joint |
| 7910052700 | Glass transfer tube, 160 L incl. clip |
| 7910052900 | Torch one piece ball joint rad 1.4mm inj |
| 79826-87601 | CAP, Conn 1 |
| 79826-87602 | Cap, Conn 2 |
| 79826-87605 | CAP, CONN .5 |
| 79826-87606 | Capillary, 80 x 0.17mm |
| 79826-87607 | Capillary, 280 x .17mm |
| 79826-87608 | Connection, capillary, 400mm, 0.17mm id |
| 79835-04123 | Diaphragm |
| 79835-65213 | Replacement sieve for check valve crtrdg |
| 79835-67101 | Check valve cartridge |
| 79835-87330 | Solvent mixer |
| 79835-87638 | Column, connector |
| 79841-65501 | Lubricant |
| 79841-87609 | Capillary tubing, 35mm, 0.12mm id. |
| 79841-87610 | Capillary 60 mm |
| 79846-27101 | Seal, threaded end of syringe |
| 79846-27103 | Seal, threaded end of syringe 250ul |
| 79846-67101 | Needle seat |
| 79846-87201 | Needle insert, 25 ul |
| 79846-87202 | Needle insert, 250ul |
| 79846-87601 | Syrng. Capillary 0.25um id, 100mm |
| 79846-87604 | 25ul Loop Capillary |
| 79846-87605 | Seat capillary, 0.12 mm id, 110 mm |
| 79847-60005 | Magazine rack for automatic sampler |
| 79853-68742 | WINDOWS FOR 79853C |
| 79853-68743 | GASKET#1 STD CELL(D) |
| 79880-22711 | Holmium Oxide filter |
| 79883-22404 | Window Screw, SST |
| 79883-27101 | High Pressure Seal Ring |
| 79883-28802 | High Pressure Compression washer |
| 79883-68700 | HI-PR-Cell Kit |
| 79883-68701 | Standard cell repair kit, 1050/1090 |
| 79883-68702 | Gaskets, cell 12/PK |
| 79883-68703 | Cell Screw Kit |
| 810099000 | Mounting bkt inert SM s/c Liberty AX ICP |
| 810132000 | Mounting bkt, cooled s/c Liberty ICP 1/p |
| 810166900 | Standards rack SPS 3, 11 x 16mm od tubes |
| 810167000 | Standards rack SPS 3, 6 x 29mm od tubes |
| 810177600 | Tube holder for SPS 3 autosampler, 1/pk. |
| 810187500 | Mounting bkt, Twister s/c radial ICP 1/p |
| 810187600 | Mounting bkt, Twister s/c axial ICP 1/p |
| 815-0129 | Tubing polyurethane 1/8 x 1/4 in, r ft |
| 815-0485 | Tubing PTFE (.125od x 0.065id)in. r ft |
| 816-0018 | Kit microdissecting UMAS |
| 8500-0656 | PFTBA sample, 10 g |
| 8500-4328 | Headspace Evaluation Sample |
| 8500-4789 | Cap. Inlet Evaluation Sample, Split mode |
| 8500-5067 | RF, SAMPLE |
| 8500-5808 | HCB rformance sample |
| 8500-6813 | Test Std, HP-FFAP (Capillary/Megabore) |
| 8500-8510 | PFDTD Calibrant, 1 ml |
| 8660-0827 | Abrasive Mesh 4000 Grit |
| 8660-0852 | Abrasive Mesh (Micro-Grit Par) |
| 8710-2474 | Multifunction tool |
| 8829953800 | Vacuum Pump Oil, Inland 45, 1 L |
| 883-9120 | Polystyrene test card (uncertified) 1/pk |
| 883-9750 | Attenuation screen, 1/pk |
| 884-1000 | Sample holder, UMA, 1/pk |
| 89075-23800 | MCT Adjustment Tool |
| 89090-84700 | Temrature Sensor Support |
| 899-1752 | Sample probe, tube, 1/pk |
| 899-1794 | Spare desiccant cartridge for FTIR, 1/pk |
| 910032900 | COVER-CAROUSEL |
| 910245400 | SPS-3 Autosampler cover. 1pk |
| 925-0128 | Polystyrene film, NIST traceable. 2/pk |
| 9300000400 | Filament,Rhenium (Re) alloy,3 x 0,1/pk |
| 9300014200 | SPRAY SHIELD, GOLD, API |
| 9300-1747 | Electrolyte Bottle Cap |
| 9300-1748 | Bottle, 500ml, electrolyte |
| 9301-0273 | Tube, capillary 100/PK |
| 9301-0633 | Syringe, 25ul HPLC injector syringe |
| 9301-0675 | Repair Kit 25ul, Replacement Plunger |
| 9301-1420 | Solvent reservoir, 1L |
| 9301-1421 | Solvent Reservoir 1L with cap |
| 9301-1450 | Solvent reservoir,amber,1L for 1100/1200 |
| 9310-4828 | Wis, industrial 300/PK |
| 9810039490 | Inert hi-solids sample intro kit, radial |
| 9810039590 | High solids sample intro kit, radial 1/p |
| 9810039690 | Dirty organic sample intro kit axial 1/p |
| 9810039790 | Aqueous sample intro kit, axial 1/pk |
| 9810039890 | Routine organic sample intro kit axial |
| 9810046390 | Hi-sens HF+TDS sample intro kit rad ICP |
| 9810046490 | Hi-sens hi-TDS sample intro kit rad ICP |
| 9810046590 | Flex sample intro kit, Hi-TDS + Org, ax |
| 9810046690 | Hi-sens sample intro kit axial ICP, 1/pk |
| 989-0083 | Lamp, 1/pk |
| 9910024400 | Venturi kit, EK, for barrel neb. 1/pk |
| 9910024500 | Nebulizer capillary kit, Pt/Ir, 1/pk |
| 9910024700 | Nebulizer cleaning wire, 3/pk |
| 9910024800 | Capillary tubing, high solids, 3m length |
| 9910025200 | O-ring/gasket kit, Mark IV spray chamber |
| 9910025700 | Glass impact beads Mark V/VI/7. 5/pk |
| 9910026500 | O-ring/gasket kit, Mark VI spray chamber |
| 9910032200 | Carousel and cover PSD 96, 1/pk |
| 9910032700 | Furnace workhd viewing mirror GTA 96/100 |
| 9910035200 | Barrel nebulizer O-ring kit, 1/pk |
| 9910040000 | VGA-76/77 Hydride absorption cell. 2/pk |
| 9910040200 | Gas-liquid separator VGA-76 for AA |
| 9910040700 | Mercury absorption cell VGA 76/77, 1/pk |
| 9910043500 | Nebulizer adjustable barrel, 1/pk |
| 9910043700 | Nebulizer hi-vac barrel, 1/pk |
| 9910044000 | Capillary tubing, hi-vac nebulizer, 3/pk |
| 9910045700 | O-rings for Mark VI Univ s/chamber, 1/pk |
| 9910047700 | ND and Blue filter set with holder, 1/pk |
| 9910053300 | PTFE impact beads Mark V/VI/7. 5/pk |
| 9910053900 | Burner cleaning strips, 100/pk |
| 9910054400 | Quartz atomization cells, ACT-80, 10/pk |
| 9910056800 | Torch, semi-demountable for radial ICP |
| 9910056900 | VGA 76 update kit, ICP gas-liq separator |
| 9910057000 | Quartz injector 1.8mm Semi-demount 3/pk |
| 9910057200 | ICP sample compartment O-ring kit, 1/pk |
| 9910057300 | Injector holder kit, semi-demount torch |
| 9910057400 | Inert V-groove neb for inert SM s/chamb |
| 9910061100 | Mark VI Universal spray chamber, 1/pk |
| 9910061200 | GTA 100 sampler carousel + cover |
| 9910061600 | Liquid trap + float, Univ. Mk VI, 1/pk |
| 9910062000 | Gas-liquid separator VGA 77 for ICP 1/pk |
| 9910062100 | Hydride module for VGA 77, AA oration |
| 9910062200 | Hydride module for VGA 77, ICP oration |
| 9910063100 | Press. relief bung Mk VI s/chamber, 1/pk |
| 9910063200 | Mark VI Univ s/chamber bung assy. 1/pk |
| 9910063600 | Mixing paddles, Mark VI s/chamber, 5/pk |
| 9910066300 | Nebulizer adj. barrel, organic, 1/pk |
| 9910066700 | Carousel + cover PSD 97 a/sampler, 1/pk |
| 9910066800 | Temrature probe holder, square, 4/pk |
| 9910066900 | Temrature probe holder, tared, 4/pk |
| 9910068500 | UV-Vis reflectance probe holder, 1/pk |
| 9910070400 | Cooled double pass spray chamber for ICP |
| 9910071100 | Gas-liquid separator VGA-77 for AA |
| 9910072000 | KIT ORGANICS ICP-OES |
| 9910075000 | KIT TOOLS COMMON |
| 9910076800 | VGA for Zeeman adaptor AA-600/800Z, 1/pk |
| 9910077600 | Pump bands for SIPS 10/20, 10/pk |
| 9910080300 | Kit Cap Seals for SIPS 10/20, 10/pk |
| 9910081400 | O-ring kit for ICP Argon Saturation Accy |
| 9910081600 | O-ring kit for cooled spray chamber, 1/p |
| 9910083700 | Ty 25 rack overlay kit - 17mm od tubes |
| 9910083800 | Ty 25 rack overlay kit 18.5mm od tubes |
| 9910084400 | Inert hi-solids sample intro kit, axial |
| 9910084700 | Torch, semi-demountable for axial ICP |
| 9910091200 | Furnace workhd viewing mirror GTA110/120 |
| 9910093000 | Nebulizer capillary kit Mark 7 s/c, 1/pk |
| 9910093100 | Nebulizer block, Mark 7 s/chamber, 1/pk |
| 9910093300 | VGA for Zeeman adaptor kit AA240/280 |
| 9910093400 | Mark 7 spray chamber O-ring kit, aqueous |
| 9910093500 | Mark 7 spray chamber O-ring kit, organic |
| 9910093600 | Mixing paddles fluorinated Mark 7, 5/pk |
| 9910097900 | Cable kit, Cary 50 Dissolution accy 1/pk |
| 9910100700 | Kit Organics Axial |
| 9910102100 | PCI GPIB-IEEE (NI) Interface card |
| 9910102500 | Hg flow thru cell holder AA 220/240G,1/p |
| 9910105800 | Liquid trap, Mark 7 spray chamber, 1/pk |
| 9910106300 | Torch, fully demountable for axial ICP |
| 9910106400 | Torch, fully demountable for radial ICP |
| 9910106900 | Kit, mounting brkt dem torch, radial ICP |
| 9910107000 | Kit, mounting brkt dem torch, axial ICP |
| 9910107100 | Gazfit fitting for ICP torch, 6mm, 4/pk |
| 9910107700 | Neb. EzyFit sample inlet 1.3mm od, 10/pk |
| 9910108200 | O-ring kit for fully demountable torch |
| 9910108300 | Kit Agilent aa certification, 1/pk |
| 9910111900 | SPS 3 probe 0.8mm id inert, PTFE sleeved |
| 9910112000 | SPS 3 probe 1.0mm id inert, PTFE sleeved |
| 9910112600 | Matrix Valu-Pack axial ICP + inert s/c |
| 9910112700 | Extenda Valu-Pack radial ICP + inert s/c |
| 9910112800 | Extenda Valu-Pack axial ICP + cycl. s/c |
| 9910113100 | High capacity carousel kit for GTA 120 |
| 9910116800 | Syringe kit for PSD-97/100/110. 1/pk |
| 9910117800 | All-Glass Sample System, Axial |
| 9910120200 | Purged cabinet hardware kit,1/pk |
| 9910125200 | Tubing kit axial ICP ketone + inert s/c |
| 9910125600 | Hi Solids SIS kit, axial ICP w/cycl. s/c |
| 9910125700 | Hi Solids SIS kit, radial ICP w/cycl s/c |
| 9910125800 | Hi Solids SIS kit, axial ICP w/inert s/c |
| 9910125900 | Hi Solids SIS kit radial ICP w/inert s/c |
| 9910126000 | Application kit, Inert SIS for axial ICP |
| 9910126100 | Application kit Inert SIS for radial ICP |
| 9910126200 | Application kit Inert, radial ICP no s/c |
| 9910126300 | Organics SIS kit, axial ICP w/cycl. s/c |
| 9910126400 | Organics SIS kit, radial ICP w/cycl. s/c |
| 9910126500 | Organics SIS kit, axial ICP w/inert s/c |
| 9910126600 | Organics SIS kit, radial ICP w/inert s/c |
| 9910126700 | Aromatics SIS kit, axial ICP w/cycl. s/c |
| 9910126800 | Aromatics SIS kit radial ICP w/cycl. s/c |
| 9910126900 | Aromatics SIS kit, axial ICP w/inert s/c |
| 9910127000 | Aromatics SIS kit radial ICP w/inert s/c |
| 9910127100 | Ketones SIS kit, axial ICP w/cycl. s/c |
| 9910127200 | Ketones SIS kit, radial ICP w/cycl. s/c |
| 9910127300 | Ketones SIS kit, axial ICP w/inert s/c |
| 9910127400 | Ketones SIS kit, radial ICP w/inert s/c |
| 9910127500 | Volatiles SIS kit, axial ICP w/cool s/c |
| 9910127600 | Volatiles SIS kit, radial ICP w/cool s/c |
| 9910127800 | Nebulizer EzyLok gas connector, ICP-OES |
| 9910128300 | Flow cell repl ftg, PS325/335, 1/pk |
| 9910129500 | PSD 120 sampler carousel + cover, 1/pk |
| 9910130600 | Kit Exhaust Cabinet Hardware |
| 9910130900 | SPS 3 probe 1.3mm id inert, PTFE sleeved |
| 9910137800 | Kit, Needle U and Injection port seal |
| 9910141000 | Hi Solid SIS kit, axial ICP inert+sheath |
| 9910141700 | Kit external source (xe + d2), 1/pk |
| 9910143200 | SVS2 sample loop kit 1 (0.25mL) |
| 9910143300 | SVS2 sample loop kit 2 (0.5mL) |
| 9910143400 | SVS2 sample loop kit 3 (1.0mL) |
| 9910143500 | SVS2 sample loop kit 4 (1.5mL) |
| 9910143600 | SVS2 sample loop kit 5 (2.0mL) |
| 9910143700 | SVS2 sample loop kit 6 (2.5mL) |
| 9910143800 | SVS2 sample loop kit 7 (3.0mL) |
| 9910143900 | SVS2 sample loop kit 8 (3.5mL) |
| 997-0081 | Xenon source and power supply, 1/pk |
| 997-0082 | Deuterium source and power supply, 1/pk |
| 998-0000053-EHS | Union Elbow M5 |
| AS5001180 | Inlet filter,for 212 pump,1/pk |
| ASA5001009U10 | SEAL, 2mL PISTON, 212-LC, UHMW, 10PKG |
| ASA5001009U2 | SEAL, 2mL PISTON, 212-LC, UHMW, 2PKG |
| ASA5001133 | Inlet outlet cv crtdg,212-LC 2mL head |
| AX2050-1 | 971-FP ELSD Connection Kit |
| CP23050 | Fingertight Fitting EK |
| CP23054 | Fingertight Fitting EK (Set of 10) |
| CP392372031 | NICKEL CATALYST COLUMN FACTORY INSTALLED |
| CP470127 | Vesl Ferrule 1/16X0.8 Sp21 |
| CP490210 | 490 Micro GC set of 5 internal filter |
| CP736202 | Filter, charcoal, SS, 1/16in.OD, 1/pk |
| CP736467 | 5 FILTERS for EXT.FILTER Assy |
| CP737886 | COC insert for 530 um Ultimetal column |
| CP739531 | Membrane repls-BTU,Genie 170, 5/pk |
| CP740206 | Pump manifold Assy |
| CP741035 | Calibra smpl,SimDist (D2887E),hazd,1/pk |
| CP741161 | Flush vial,assy,large,1/pk |
| CP742210 | Carrier gas Duo-bed ncil filter |
| CP742211 | Split line ncil filter |
| CP85315 | Valve,BHU,SS,1/8inx1/16in |
| CP85518 | Filter, 7 um, 1/pk |
| CP86517 | Union b/h,Valco,Silco,1/8inx1/16in.,1/p |
| CP912241 | Replacement for oil mist eliminator |
| CP913246 | ICP nebulizer, PTFE MiraMist, 1/pk |
| CP913584 | Z-axis drive tubing, ASX 130/260, 1/pk |
| CP914394 | Mounting brkt Tracey inert s/c Axial ICP |
| CP914395 | Mounting brkt Tracey inert s/c Radl ICP |
| CP914396 | ICP Nebulizer Opalmist PFA conc. 2mL/min |
| CP914397 | ICP spray chamber Tracey TFE inert+Helix |
| CP914506 | ICP nebulizer, EK MiraMist, 1/pk |
| CP914708 | ICP s/chamber Tracey glass cycl + Helix |
| CP914815 | ICP nebulizer, Ceramic VEE spray, 1/pk |
| CP914870 | Torch radl hi-solid+ball joint 1.8mm inj |
| CP914879 | Alumina injector 2.4mm Semi-demount 1/pk |
| CP915038 | Dewar holder + cap for Cary Eclipse |
| CP915259 | Fiber optic probe quartz low temrature |
| CP915296 | Capillary for SnCl2, Hg Analyzer, 1/pk |
| CP959366 | Neb SeaSpray 2mL/min at 1 L/min w/EzyFit |
| C-TBE10 | Empty Stainless Steel TD Tubes, 10 pack |
| C-TBP1C1C | Carbograph 1 SS Tube for Pumd C5-C14 |
| C-TBP1CXC | Carb X SS Tubes for Pumd/Diffusion |
| C-TBP1TC | Tenex SS TD Tubes, Preconditioned/Capd |
| C-TNXTA | Tenax TA 35-60 Mesh, 10 Grams |
| C-UN010C | Universal SS Tubes, Pack of 10 |
| DY70007701 | Sparge Probe, S/N above 13160, Cleaned |
| G1072-20008 | Cylinder, draw out |
| G1099-20030 | Column Installation tool for 5973/5975 |
| G1099-20130 | ION Source Chamber |
| G1099-20132 | 73 Reller Ultra |
| G1099-20133 | Reller insulator |
| G1099-20136 | Transfer line sckt |
| G1099-60566 | 597X Tool Kit and cleaning supplies |
| G1099-80001 | High energy dynode, 5973 series |
| G1099-80039 | Oil Mist Filter, 3/8 BSP Male Threads |
| G1103-61611 | General Purpose Cable |
| G1120-60006 | 8453 UV Vis Stirring Module kit |
| G1120-62301 | Cell Holder, Multi Cell Transport |
| G1156-68711 | Capillary kit Column regeneration AS |
| G1156-68712 | Capillary kit column selection 6 columns |
| G1156-68713 | Capillary kit column regeneration prep |
| G1156-68714 | capillary kit (ext) sample enrichment |
| G1160-68706 | Solvent selection tubing kit 4 solvents |
| G1176-60541 | Split vent trap for the 6820 |
| G1290-60600 | I.D. Cable 7694/3396 |
| G1310-68730 | PM Kit for isocratic/quaternary pump |
| G1310-68731 | PM Kit for seal wash option |
| G1310-68741 | PM kit for 1260 Iso/Quat/1220 pump |
| G1310-68742 | Seal wash PM kit for 1260 Pump |
| G1311-60002 | Plunger Housing |
| G1311-60003 | Bottle Head Assembly |
| G1311-60006 | In-line filter for G1311A |
| G1311-60009 | Purge valve assembly, SST |
| G1311-67304 | LC Pump PTFE connecting tube |
| G1311-68705 | 1100/1200 Pump accessory kit |
| G1311-68710 | Pump Start-up Kit |
| G1311-68711 | Active seal wash kit for iso/quat pumps |
| G1311-81600 | Capillary, damr to inlet chamber 2 |
| G1311-81601 | Capillary, outlet valve to damr |
| G1312-60020 | Cartridge for active inlet valve 600bar |
| G1312-60023 | Purge valve assembly, 600 bar |
| G1312-60025 | Active inlet valve,without cartridge |
| G1312-60061 | Purge Valve 1260 |
| G1312-60066 | Passive Inlet Valve 1220/1260 |
| G1312-60067 | Outlet Ball Valve for 1100/1200/1260 |
| G1312-60068 | 1260 Solvent Selection Valve |
| G1312-60166 | 1260 Infinity inlet valve ty N |
| G1312-60167 | 1260 Infinity outlet valve ty N |
| G1312-67300 | Capillary Outlet ball valve to piston 2 |
| G1312-67301 | Capillary, damr to purge valve |
| G1312-67302 | Mix.SST-Capillary Assembly, binary pump |
| G1312-67304 | Restriction Capillary,SST |
| G1312-67305 | SST connecting capillary,60cm, 0.17mm |
| G1312-67500 | Calibration Capillary Assy |
| G1312-68711 | Active seal wash kit for binary pumps |
| G1312-68716 | Bottle head assembly for F29/32 tared |
| G1312-68730 | PM Kit for binary pump |
| G1312-68741 | PM kit for G1312 binary pump |
| G1312-87300 | Absorber capillary, 500uL volume |
| G1312-87301 | SST Restriction capillary, 0.17mm id |
| G1312-87303 | SST Capillary 400x0.17 mm, m/m, ps/ps |
| G1312-87304 | SST Capillary 700x0.17mm, m/m, ps/ps |
| G1312-87305 | SST Capillary 150x0.17mm, m/m, ps/ps |
| G1312-87306 | SST Capillary 105x0.17mm, m/m, ps/ps |
| G1312-87330 | Solvent mixer, 1100/1200 Series |
| G1313-27302 | Disposal Tube for ext. vial tray |
| G1313-43204 | Seat adapter |
| G1313-43216 | Waste Adapter, 1100/1200 Autosamplers |
| G1313-44510 | 100 position tray for 2 ml vials |
| G1313-44512 | Tray for 40 2ml Vials |
| G1313-44513 | Tray for 15 6ml vials |
| G1313-60004 | External Vial Tray for 17 2m vials |
| G1313-68709 | Autosampler Start Up Kit |
| G1313-68711 | G1313 Multidraw kit |
| G1313-68712 | Post Column reaction kit for 1100/1200LC |
| G1313-68713 | Arm Spare Kit |
| G1313-68719 | PM Kit for G1329B Autosampler |
| G1313-68730 | PM Kit for standard autosamplers |
| G1313-87102 | Needle seat EK, 0.17 mm id capillary |
| G1313-87104 | Needle seat EK w/o capillary, G1313A |
| G1313-87201 | Needle, G1313A Autosampler |
| G1313-87202 | Needle, 900ul, 1100/1200 |
| G1313-87203 | Needle assy for use with EK seat |
| G1313-87300 | Waste tube,PTFE, 12cm, 0.7mm id |
| G1313-87301 | Capillary to metering device |
| G1313-87302 | EK Seat Tubing, 0.17mm id 100mm, 2,3ul |
| G1313-87303 | Loop extension capillary,SST 900 ul |
| G1313-87304 | Capillary, 18cm, .12mm id 1/16 male/male |
| G1313-87305 | Capillary, 0.17x180mm 1/16 in male/male |
| G1313-87306 | EK Capillary, 0.25 mm id, 160 mm |
| G1313-87307 | Seat capillary, 0.5ml, 0.5mm id |
| G1313-87308 | Seat capillary, 1.5ml, 0.9mm id |
| G1313-87309 | EK Loop Capillary for 100ul Sample |
| G1314-60081 | MICRO CELL ASSY |
| G1314-60182 | Hi Pressure flow cell VWD,10mm,14ul,RFID |
| G1314-60183 | Semi-micro flow cell VWD,6mm,5ul,RFID |
| G1314-60186 | Standard flow cell VWD,10mm 14ul,RFID |
| G1314-60187 | Micro Flow cell VWD,3mm,2ul,RFID |
| G1314-65050 | CELL KIT STD |
| G1314-65051 | Gasket No.2 std service |
| G1314-65052 | CELL KIT MICRO |
| G1314-65053 | Gasket No. 2 micro service |
| G1314-65054 | Cell Kit High Pressure |
| G1314-65056 | Cell Kit Semi-Micro |
| G1314-65061 | CELL KIT STD |
| G1314-65062 | CELL SCREW KIT |
| G1314-65063 | Gasket No. 1 KIT |
| G1314-65064 | Gasket No.2 KIT |
| G1314-65065 | Ring KIT |
| G1314-65066 | Ring No.2 KIT |
| G1314-68705 | G1314A VW detector accessory kit |
| G1314-87301 | Capillary ST 0.12 x 310mm S/E |
| G1314-87302 | Capillary ST 0.17 x 120mm S/E |
| G1315-27705 | Cell housing for quartz prep flow cells |
| G1315-45001 | Lever for Holmium Oxide Filter |
| G1315-60011 | Semimicro flowcell, 6mm, 5ul, 120bar |
| G1315-60012 | Standard flowcell, 10mm, 13ul, 120bar |
| G1315-60015 | High pres.micro flowcel,6mm,1.7ul,400bar |
| G1315-60016 | Preparative flow cell SS 3mm path length |
| G1315-60017 | Preparative flow cell, quartz 0.3mm path |
| G1315-60018 | Preparative flow cell quartz 0.06mm path |
| G1315-60022 | Standard flow cell 10mm, 13uL, 120bar |
| G1315-60024 | Micro Flow cell 2 uL, 3mm path, 120 bar |
| G1315-60025 | Semi Micro Flow cell 5 uL, 6mm, 120 bar |
| G1315-67301 | PTFE connecting tubing for Quartz prep |
| G1315-67302 | PTFE connecting tubing for Quartz prep |
| G1315-68703 | Fused silica/EK capillary 50um 40cm |
| G1315-68708 | Fused silica/EK capillary 75um 70cm |
| G1315-68710 | Front seals (std/semimicro) 12/PK |
| G1315-68711 | Back seals-std cell 12/PK |
| G1315-68712 | Cell repair kit for standard cell |
| G1315-68713 | Cell repair kit-semi micro cell |
| G1315-68715 | Sealing kit for 500nl flow cell |
| G1315-68716 | 80 nL Flow Cell for 1100/1200 DAD/MWD |
| G1315-68724 | 500 nL Flow Cell for 1100/1200 DAD/MWD |
| G1315-68725 | Sealing kit for 80 nl flow cell |
| G1315-80001 | Quartz cell body, 10mm |
| G1315-80002 | Quartz cell body, 80 nL, 6mm path length |
| G1315-80004 | Quartz body, 0.3 mm for prep flow cell |
| G1315-87101 | Cell seal assembly (500nl) |
| G1315-87102 | 80nl cell seal assembly |
| G1315-87302 | Outlet capillary, 0.17mm id |
| G1315-87303 | SST Capillary 150x0.17mm,m/f,ns |
| G1315-87305 | SST connecting capillary for SST prep |
| G1315-87306 | Outlet capillary, 0.12mm id |
| G1315-87307 | SST Capillary 500x0.12mm, m/m, ps/ns |
| G1315-87311 | Column connect capillary, 380 x 0.17mm |
| G1315-87312 | Column connect capillary 150 x 0.12mm |
| G1315-87313 | Fused silica/EK capillary, 25um 20cm |
| G1315-87318 | Fused silica/EK capillary, 25um 60cm |
| G1315-87319 | DAD heat exchanger capillary 310 x0.17mm |
| G1315-87321 | Inlet capillary w heat exchanger 0.17mm |
| G1315-87323 | Fused silica/EK capillary, 50um 40cm |
| G1315-87325 | Inlet capillary w heat exchanger 0.12mm |
| G1315-87328 | Fused silica/EK capillary, 50um 12cm |
| G1315-87333 | Fused silica/EK capillary, 100um 30cm |
| G1315-87339 | DAD heat exchanger capillary 310x0.12mm |
| G1316-27301 | SS Capillary 100x0.12mm, m/m, ns/ns 0.8 |
| G1316-60001 | Thermal Column Insulation Enclosure Kit |
| G1316-68706 | Fitting holder assembly |
| G1316-68709 | 2Pos/10Port col switching valve kit |
| G1316-68711 | Capillary kit column regeneration intern |
| G1316-68716 | Capillary kit for 0.12 mm id use of 1200 |
| G1316-68721 | Capillary kit micro column regeneration |
| G1316-80002 | Heater Long Up 0.12ID (1.6ul internal) |
| G1316-80003 | Heater Long Down 0.12ID (1.6ul internal) |
| G1316-80004 | Heat Exchanger/Cooler, 1.5uL |
| G1316-80012 | Heat Exchanger 1290 Series long down |
| G1316-80013 | Heat Exchanger 1290 Series long up |
| G1316-83200 | Carrier for heat exchanger TCC SL |
| G1316-87300 | Capillary, 0.17x90mm 1/16 in male/male |
| G1316-87303 | Capillary connect.capillary, 7cm, 0.12mm |
| G1316-87304 | SS Capillary 130x0.12mm, m/f, ns 0.8 |
| G1316-87305 | SS Capillary 340x0.12mm, m/m, ps/ns 0.8 |
| G1316-87306 | SS Capillary 75x0.12mm, m/m, ns/ns 0.8 |
| G1316-87309 | SST Capillary 500x0.12 mm, m/m, ps/ns |
| G1316-87312 | SST Capillary 50 x 0.12 mm, m/f, ns |
| G1316-87313 | SST Capillary 70 x 0.12 mm, m/f, ns |
| G1316-87314 | SST Capillary 90 x 0.12 mm, m/f, ns |
| G1316-87315 | SST Capillary 130 x 0.12mm, m/f, n-s |
| G1316-87316 | SST Capillary 170x0.12 mm, m/m, n-s/n-s |
| G1316-87317 | SST Capillary 210x0.12 mm, m/m, n-s/n-s |
| G1316-87318 | SST Capillary 300x0.12 mm, m/m, n-s/n-s |
| G1316-87319 | SST Capillary 340x0.12 mm, m/m, n-s/n-s |
| G1316-87321 | SST Capillary 105x0.17mm, m/m, n-s/n-s |
| G1316-87323 | SST Capillary 170x0.17mm, m/m, n-s/n-s |
| G1316-87326 | SS Capillary 75x0.12mm, f/m, ns 0.8 |
| G1316-87327 | SST Capillary 170x0.12 mm, m/f, n-s |
| G1316-87328 | SS Capillary 210x0.12mm, m/m, ps/ns 0.8 |
| G1316-89200 | Carrier for heat exchanger TCC SL Plus |
| G1321-60005 | Flow cell 8ul for FLD |
| G1321-60007 | Cuvette 8ul for FLD |
| G1321-60015 | Flow cell 4ul for FLD |
| G1322-67300 | Tubing kit degasses to pump |
| G1322-68705 | Online degasser asscessory kit |
| G1328-87600 | SST Capillary, 500 x 0.17mm |
| G1329-60011 | Tray for 100 x2ml vials, thermostattable |
| G1329-68718 | Light Protection Kit for G1329A |
| G1329-68719 | PM kit for 1200 autosampler SL |
| G1329-68726 | Cabinet Upgrade Kit for G1329A |
| G1329-68727 | Door Replacement Kit for G1329A |
| G1329-68736 | Cabinet Upgrade Kit for ALS |
| G1329-68737 | Door Replacement Kit for ALS |
| G1329-80001 | u-LC needle for G1329 autosampler |
| G1329-87012 | Seat assy 0.12mm ID Standard Autosampler |
| G1329-87017 | Seat assy 0.17mm ID Standard Autosampler |
| G1329-87101 | Needle seat/capillary, 100um id, 1.2 uL |
| G1329-87103 | Needle seat/capillary, 50um id, 0.3uL |
| G1329-87300 | SST capillary 90cm, 0.17mm id, 1/16 fitt |
| G1329-87302 | Extended loop capillary, 0.25mm 180cm |
| G1361-22402 | Sapphire piston for prep pump |
| G1361-23204 | Frit adapter, 4mm, PTFE |
| G1361-23205 | Frit Adapter, PTFE for 4.7 mm od tubing |
| G1361-60008 | PREP PRESSURIZED IN ASSY |
| G1361-60012 | Valve assy, inlet/outlet for prep pump |
| G1361-60022 | Bottle Head Assyembly for Prep System |
| G1361-67300 | SS Capillary, 0.6x173 mm, 2 1/16in male |
| G1361-67301 | SS Capillary, 0.6x175 mm, 2 1/16in male |
| G1361-67302 | SS Capillary, 0.6x400 mm, 2 1/16in male |
| G1361-67303 | SST Capillary, 0.5x160 mm, 2 1/16in male |
| G1361-67304 | SS capillary, 0.6x111 mm, 1/16in male |
| G1361-67305 | SS capillary, 0.6x40 mm, 1/16in male |
| G1361-67306 | SS capillary, 0.6x367 mm, 1/16in male |
| G1361-68707 | Accessory kit prep pump/gradient G1361A |
| G1361-68710 | PM kit for 1100 series prep pump |
| G1362-68706 | Interface Tubing Kt |
| G1362-87300 | Interfacing Capillary |
| G1364-27107 | Flap Septum, EK, for internal tray |
| G1364-60011 | Needle carrier without needle, prep |
| G1364-60021 | Pushing Adapter Assy for G1364D |
| G1364-68706 | On-Line matrix Kit for MALDI spotting |
| G1364-68711 | Preparative tubing kit 0.8mm i.d (PTFE). |
| G1364-68712 | Analytical tubing kit 0.25 mm i.d (PTFE) |
| G1364-68723 | Low Disrsion Tubing Kit 0.15mm ID PTFE |
| G1364-68730 | Funnel seals,10/pk for G1364-84502 Tray |
| G1364-81701 | Maldi Spotting Tips, PTFE (10/pk) |
| G1364-83205 | MALDI spotting adapter for G1364D |
| G1364-84516 | Tray holding 215 tubes,12x100mm,7ml |
| G1364-84521 | Tray for 4 well plates, cooled |
| G1364-84522 | Tray, 2 well plates, 10 funnels cooled |
| G1364-84523 | Tray Holding 40 tubes, 30x100mm, 50ml |
| G1364-84524 | Tray Holding 60 Tubes, 25x100mm,35ml |
| G1364-84525 | Tray holding 126Tubes, 16x100mm,14ml |
| G1364-84531 | Tray for 4 Well Plates,adjustable,cooled |
| G1364-84532 | 40Funnel Tray for G1364C FractionCollect |
| G1364-86707 | Tubing for funnels of G1364-84502, 10/PK |
| G1364-86708 | Waste tube 0.5mm id analyt intern tray |
| G1364-86711 | Waste tube, PTFE, 20cm 1.4mm id 2.0mm od |
| G1364-87201 | Needle assy short for fraction collector |
| G1364-87202 | Needle Assy, 20 mm for G1364C |
| G1364-87304 | Fused silica/ek capillary, 25um, 50cm |
| G1364-87305 | Fused silica/ek capillary, 50um, 50cm |
| G1364-87306 | Fused silica/ek capillary, 100um, 50cm |
| G1367-60003 | 100 uL analytical head assembly |
| G1367-60301 | SST cap valve to metering 0.17x160mm |
| G1367-68705 | Well Plate Sampler Accessories Kit |
| G1367-68713 | High Volume Kit for G1367D |
| G1367-68730 | PM Kit for well plate autosamplers |
| G1367-68734 | PM KIT for HiP Sampler G1367C/D |
| G1367-68741 | PM kit for G1367E sampler |
| G1367-87012 | Low Carry Over Seat 0.12 |