9726-A35美國Cannon恒溫粘度水浴CT-2000 Constant Temperature Bath
微處理機控制ct - 2000系列恒溫浴適應粘度計管需要浴深度12”和提供可靠的溫度控制從10°C到150°C。該單元可容納7個同時的粘度測定。
精確精確的溫度控制 溫度范圍:10°C到150°C 溫度精度:±0.01°C從10°C到100°C;從100°C±0.03°C到100°C 符合ASTM D445溫度敏感性要求的運動學粘度測定 電機驅動式攪拌器確保浴溫均勻 微處理器控制的溫度調節和網絡能力 在面板鍵盤上數字輸入理想的沐浴溫度和校準溫度
集成微處理器自動調節浴溫 目標和實際浴溫度監控的RTD溫度探測器,不斷顯示在°C或°F在液晶屏幕上 rs - 232和rs - 485通信端口提供數據采集和多單元聯網功能
高效,用戶友好的設計 7個玻璃粘度計端口(每2個直徑)和兩個溫度計端口(直徑為0.4個)允許7個同時的粘度測定* *兩種電熱元件快速將浴介質加熱到選定的溫度 不銹鋼擋板提供了一種簡單的反射式觀察背景 整體不銹鋼冷卻盤管允許連接或循環冷卻水冷卻器的溫度略高于或低于環境。一個外部的熱電浴冷卻器也是可用的。方便的抽屜提供方便的電氣控制 能使用水或油作沐浴液
9726-A35美國Cannon恒溫粘度水浴CT-2000 Constant Temperature Bath
The microprocessor-controlled CT-2000 series constant temperature bath accommodates viscometer tubes requiring a bath depth up to 12" and provides reliable temperature control from 10 °C to 150 °C. The unit accommodates up to 7 simultaneous viscosity determinations.
Precise and accurate temperature control
- Temperature range: 10 °C to 150 °C*
- Temperature accuracy: ± 0.01 °C from 10 °C to 100 °C; ± 0.03 °C from 100 °C to 150 °C
- Meets ASTM D445 temperature sensitivity requirements for kinematic viscosity determination
- Motor driven stirrer ensures a uniform bath temperature
Microprocessor-controlled temperature regulation & networking capabilities
- Desired bath temperature and calibration temperatures are digitally entered on the front panel keypad
- Integrated microprocessor automatically regulates bath temperature
- Both target and actual bath temperatures are monitored by an RTD temperature probe and continuously displayed in °C or °F on the LCD screen
- RS-232 and RS-485 communication ports provide data acquisition and multi-unit networking capabilities
Efficient, user-friendly design
- Seven glass viscometer ports (each 2” in diameter) and two thermometer ports (each 0.4” in diameter) allow up to 7 simultaneous viscosity determinations**
- Two electric heating elements quickly heat bath media to the selected temperature
- Stainless steel baffle provides a plain reflective viewing background
- Integrated stainless steel cooling coil allows connection to tap or recirculating water chiller for temperatures slightly above or below ambient. An external thermoelectric bath cooler is also available.
- Convenient drawer provides easy access to electrical controls
- Capable of using water or oil as bath medium
Safe operation
- Bath thermistor senses over-temperature fault and removes power
- Thermistor disconnection results in removal of bath heater power
- Liquid level sensor prevents operation if bath liquid is not at a safe operating level
Reliable performance
Dimensions (W × D × H) | 43.8 cm × 46.4 cm × 58.4 cm (17.3 in × 18.3 in × 23 in) |
Weight | 51.4 kg (113 lb) |
Shipping dimensions (W × D × H) | 61 cm × 50.8 cm × 109.2 cm (24 in × 20 in × 43 in) |
Shipping weight (with all items) | 56.7 kg (125 lb) |
Temperature range and accuracy | 10 °C to 100 °C, ± 0.01 °C 100 °C to 150 °C ±.03 °C * Test temperatures < 40 °C and high ambient temperature test environments require an optional bath cooler |
Sample capacity | 7 |
Bath height | 12 in |
Bath volume | 17 L (4.5 gal) |
Operating conditions | 15 °C to 30 °C, 10% to 75% relative humidity (non-condensing), Installation Category II; Pollution Degree 2 |
Electrical specifications | 100 - 130 Vac, 50/60 Hz; 200 - 250 Vac, 50/60 Hz; 1400 watts power consumption |
Compliance | CE Mark; EMC directive (2004/108/EC); Low voltage directive (2006/95/EC); HI-POT (1900 Vdc, 60 sec.); ROHS |
Data output | RS-232 and RS-485 |
9726-A35美國Cannon恒溫粘度水浴CT-2000 Constant Temperature Bath
9726-A35美國Cannon恒溫粘度水浴CT-2000 Constant Temperature Bath