產品介紹：

1.手術臺面采用不銹鋼，耐高溫和防腐沖洗、消毒方便；

2.工作臺面左、右分別可傾斜15°采用機械手動操縱；

3.整機結構緊湊、性能可靠合理、操縱方便；

4.底座均是采用A3鋼板電腦烤漆，配置活動輪便于移動；

5.手術臺有特定功能，及手術臺用具托盤；

6.臺面高度在820***830之間；

7.手術臺面前后分別可傾斜45°，采用手動操縱；

產品基本參數

1.臺面長度和寬度：1000×500mm

2.臺面離地面高度：820-830mm

3.臺面前后大傾角：±15

4.各傳動關節間隙（穩定性可靠）：0

Product introduction：

1.The noncorrosive table-board is made of stainless steel plate with high quality, which makes easy washing and disinfection.

2.The right-and-left gradient is 15°, regulated by the manual machinery system.

3.The table is designed with reasonable machinery, credible performance and simple operation.

4.The base is made of A3 armor plate with baking finish, and the casters add the mobility to the table.

5.The table is matched with the operating bracket tray

6.The table-board height is from 820mm to 830mm

7.The fore-and-aft gradient is 45°, regulated manually

8.The size of the table-board is 1000mm*500mm