XGH 管道環剛度試驗機 環柔度 扁平 壓縮 壓扁

微機控制管道環剛度試驗機

環剛度 環柔度 扁平 壓縮 壓扁 拉伸強度 屈服強度 斷裂伸長率 拉伸力 多項檢測

適用于熱塑性塑料管材、玻璃鋼管、雙臂波紋管、玻璃鋼夾砂管、纏繞管、PE管、PVC管、PPR管等管材環剛度試驗。用于測定zui大力值、上、下屈服強度，壓縮，環剛度、環柔度、管材拉伸、管材蠕變比率等系列試驗。

產品規格: 10N  20kN 30kN 50kN 100kN
微機控制管道環剛度試驗機  管道環剛度檢測設備
重要功能：
用于管材Φ≤3000mm；各種金屬、非金屬、復合材料、異形管材進行環剛度、環柔度、壓扁、蠕變比率、撓曲水平等力學性能指標的測試及研究。
滿足多種標準： GB、ISO、JIS、ASTM、DIN、BS、EN.
增加附具，可完成多類材料拉伸、壓縮、彎曲試驗；
1. 各種橡膠、塑料、薄膜等非金屬材料、復合材料的拉伸、壓縮、彎曲試驗。
2. 各種薄金屬、絲材、細線、纖維、彈性體、泡沫材料性能試驗。
3. 紡織、食品、藥品、化妝品、生物材料性能試驗。
4. 電子部件的拉脫、剝離、焊接強度試驗。
5. 印刷電路板的剝離、彎曲強度、緊固件性能試驗。
6. 木制品、紙產品、膠片樣品的拉伸試驗。
    依據標準
1）、 GB/T9647- 《熱塑性塑料管材環剛度的測定》
2）、GB/T18477- 埋地排水用硬聚氯乙烯（ PVC-U ）雙壁波紋管材》
3）、GB/T21238- 《玻璃纖維增強塑料夾砂管》
4）、GB/T18998.2- 工業用氯化聚氯乙烯（ PVC-C ）管道系統第2部分：管材》
5）、GB/T18042-《熱塑性塑料管材蠕變比率的試驗方法》
6）、CJ/T270 -《聚乙烯塑鋼纏繞排水管》
7）、CJ/T 120- 給水涂塑復合鋼管
8）、JT/T529- 預應力混凝土橋梁用塑料波紋管
9）、GB/T14452- 《材料彎曲力學性能試驗方法》
重要特點：
1．精密無間隙滾珠絲杠、高剛性、高穩定性的四立柱負荷機架。立柱采用高強度耐磨缸軸，淬火、精磨、保證平行；工作臺、橫梁整體實心材料，加工中心加工、精密磨削，保證平行度、垂直度。
2．載荷自動保持、應力、應變控制、循環控制及自編程控制等多種控制方式。
3.高精度測力器，線性寬，穩定性好，保證載荷的測力精度。
4.高速率、低振動、免維護、*型交流伺服電機驅動系統。
5. 內置以太網接口； 方便的手持控制器，即停即行功能；操作靈活、隨意切換。
6. 電路板采用光電隔離設計，抗*力強。
7.  寬泛的測試速度，0.001～500mm/min內任意選擇。（可定制高速0.001-2000mm/min）
8.  數據庫采用ACCESS格式，可以進行網絡數據庫通訊和管理；
9. 全數字閉環、多通道、多功能、易操作的CX-test ；數據庫中備有多種試驗方法、標準（ASTM、ISO、DIN、EN、BS等）。測控軟件
9.1試驗過程的自動控制，試驗力，峰值、變形、位移、試驗曲線的實時控制、顯示，全鍵盤輸入操作和控制模式智能設置系統；控制模式任意設置，無沖擊，平滑切換。
9.2過程能再現、數據再分析、曲線放大、比較、遍歷。
9.3試驗曲線可任意選擇坐標軸，可自由放大和縮?。豢赏瑫r(shí)顯示多個曲線，可設需要的坐標，例如：載荷－時間，載荷－位移，應力－應變等，滿度自調節。
9.4 靈活的Excel或Word報告格式，可選擇、、排序、單獨、合并、多類型輸出。
9.5模塊化、開放式編程，滿足個性化要求。具有提示和向?qū)Чδ堋?br />9.6試驗結束自動返回，智能、高效、快捷。
10. 多重保護功能：試驗力過載保護；過流、過壓保護；試樣破斷時安全保護；操作提示向?qū)ПＷo(hù)；試驗結束自動保護等。

 
 
10KN  20kN  30kN  50kN  100kN
1 zui大試驗力 10KN   20kN.   30kN.    50kN.  100kN
2 試驗機級別 0.5級       1級
3 負荷測量范圍 0.4%-*FS（0.5級）/1%～*FS（1級）
4 示值相對誤差 ≤±0.5%（0.5級）/ ≤±1.0%（1級）
5 試驗力分辨力 1/±300000F.S（全程分辨力不變）
6 變形測量范圍 0.2%-*
7 力控速率調節范圍 0.005%-5%FS/S
?8 力控速率控制精度 速率 <0.05%FS時，為±1%設定值以內；
速率 ≥0.05%FS時，為±0.5%設定值以內；
9 變形速率調節范圍 0.005～5%FS/s；
10 變形速率控制精度 速率＜0.05%FS/s時，為設定值的±1%以內；
速率≥0.05%FS/s時，為設定值的±0.5%以內；
11 位移速率調節范圍 0.001～500mm/min；（可定制高速系統0.001-2000mm/min）
12 位移速率控制精度 為設定值的±0.2%以內；
13 恒力、恒變形、恒
位移控制范圍 0.5%-----*FS
14 恒力、恒變形、恒
位移控制精度 設定值≥10%FS時，為設定值的±0.5%以內
設定值＜10%FS時，為設定值的±1%以內
15 試驗跨度 680mm
16 壓縮壓盤 620x310mm
17 試驗凈空間 0-3000mm
18 內徑變形測量范圍 100-3000mm
19 電源電壓 ～220V±10% 50Hz（須可靠接地）
20 機器功率 1.5kW
21 主機尺寸(LWH)：  ≈1000×700×3500 mm
22 機器重量 ≈1100kg

主要配置：

 
名  稱 內    容 備注
負荷機架 高剛性、四柱 1臺
驅動系統 進口交流伺服調速電機及驅動器 1套
測控,,, , 系統 CX-test全數字閉環、多通道 1套
測力傳感器   1支
手持控制器   1只
內徑變形測量系統   1套
壓縮壓盤 620x310mm 1套
計算機 主流品牌 1臺
隨機工具   1套
 技術資料 說明書、裝箱單、合格證、服務單 1套
試驗機軟件 承德市萬吉儀器儀表制造有限公司 1套

 重要擴展
WDW-20G 30G 50G 100G 微機控制環剛度試驗機 空間 3米

Machine control pipe ring stiffness testing machine is suitable for the thermoplastic plastic corrugated pipe, FRP pipe, glass steel pipes, arms sand inclusion tubes, winding pipe, PE pipe, PVC pipe, PPR pipe and other pipe ring stiffness test.
It is used to measure the maximum value, upper and lower yield strength, compression, ring stiffness, ring flexibility, tube tensile and tube creep ratio.

Product specifications: 10N 20kN 30kN 50kN 100kN
Microcomputer control pipe ring stiffness testing equipment
Important functions:
Used for pipe Φ 3000 mm or less;
The test and study of various metal, non-metal, composite, hetero-tube materials, such as ring stiffness, ring flexibility, pressure flattening, creep ratio, flexural level, etc.
Meet multiple criteria: GB, ISO, JIS, ASTM, DIN, BS, EN.
Add fixtures, and can complete the stretching, compression and bending test of many kinds of materials;
1. Rubber, plastic, film and other non-metallic materials, composite materials stretching, compression, bending test.
2. Properties of thin metal, silk, fine line, fiber, elastomer and foam material.
3. Test of the performance of textile, food, medicine, cosmetics and biological materials.
4. Test of tensile, peeling and welding strength of electronic parts.
5. Test of strip, bending strength and fastening of printed circuit board.
6. Tensile test of wood products, paper products and film samples.
According to the standard
1), GB/T9647- determination of the ring stiffness of thermoplastic pipe
2), GB/T18477- buried drainage with hard polyvinyl chloride (PVC - U) double wall corrugated pipe material
3), GB/T21238- "glass fiber reinforced plastic sand pipe"
4), GB/T18998.2- industrial chlorinated polyvinyl chloride (PVC - C) piping system part 2: pipes
5), GB/T18042- test method for creep ratio of thermoplastic pipe material
6), CJ/T270 - polyethylene plastic steel winding drain pipe
7), CJ/T 120- water supply and plastic composite steel pipe
8) JT/T529- prestressed concrete bridge with plastic bellows
9), GB/T14452- test methods for mechanical properties of materials
Important features:
1.
Precision seamless ball screw, high rigidity, high stability of the four-column load frame.
The vertical column adopts high - strength wear-resisting cylinder shaft, quenching, fine grinding and ensuring parallel.
Worktable, beam integral solid material, machining center processing, precision grinding, guaranteed parallelism, perpendicularity.
2.
Load automatic maintenance, stress, strain control, cycle control and automatic control.
3. High precision measuring device, linear width and stability, ensure the measuring precision of the load.
4. High speed, low vibration, no-maintenance, silent type ac servo motor drive system.
5. Built-in Ethernet interface;
Convenient handheld controller, namely stop and line function;
Operate flexibly, switch easily.
6. The circuit board adopts the photoelectric isolation design, strong anti-interference ability.
7. Broad test speed, optional in 0.001 ~ 500mm/min.
(customizable high-speed 0.001-2000mm/min)
8. The database adopts ACCESS format and can communicate and manage network databases;
9. All-digital closed-loop, multi-channel, multi-function, easy-to-operate cx-test;
Various test methods, standards (ASTM, ISO, DIN, EN, BS, etc.) are available in the database.
Measurement and control software
9.1 the automatic control, test force, peak, deformation, displacement and test curve of real-time control, display, all-keyboard input operation and control mode inligent setting system;
Control mode arbitrary setting, no impact, smooth switch.
9.2 process can reproduce, data reanalysis, curve amplification, comparison, traversal.
9.3 the test curve can be arbitrarily selected axis, which can be enlarged and reduced freely;
Multiple curves can be displayed at the same time, and the required coordinates can be set. For example, load - time, load-displacement, stress-strain, etc.
9.4 flexible Excel or Word report format, optional, specified, sorted, single, merged, multi-type output.
9.5 modularity and open programming to meet personalized requirements.
With hints and wizard functions.
9.6 test end automatic return, inligent, efficient and fast.
10. Multiple protection function: test force overload protection;
Overcurrent and overvoltage protection;
Safety protection when sample breaking;
Operation hint wizard protection;
Test end automatic protection, etc.

10KN 20kN 30kN 50kN 100kN
The maximum test force is 10 kn
2 tester level 0.5 level 1
3 load measurement range of 0.4% to *FS (0.5 level) /1% ~ *FS (level 1)
4. The relative error of the display value is less than or equal to plus or minus 0.5% (0.5 grade)/or + or + or + 1.0% (level 1).
5. Test force resolution 1/ + 300000F. S.
6 deformation measurement range of 0.2% to *
7 force control rate adjustment range of 0.005%-5%FS/S
? 8 force control rate control accuracy rate < 0.05% FS, plus or minus value of less than 1%;
When the speed is greater than 0.05% FS, it is less than 0.5%;
9 deformation rate adjustment range of 0.005 ~ 5% FS/s;
10. The accuracy rate of the rate of deformation rate < 0.05%FS/s is less than 1% of the set value.
When the rate is greater than 0.05% FS/s, it is less than 0.5% of the set value.
11 displacement rate adjustment range 0.001 ~ 500mm/min;
(customizable high-speed system 0.001-2000mm/min)
12. The control accuracy of the displacement rate is less than 0.2% of the set value;
Constant force, constant deformation, constant
Displacement control range 0.5%-- *FS
Constant force, constant deformation, constant
When the accuracy of the displacement control is greater than 10% of the FS, it is less than 0.5% of the set value
The set value < 10%FS is less than 1% of the set value
The test span is 680mm
16 compression pressure plate 620x310mm
Test net space 0-3000mm
18 inner diameter deformation measurement range 100-3000mm
19 power supply voltage ~ 220V plus or minus 10% 50Hz (reliable grounding)
20 machine power 1.5kW
Host size (LWH) : approximay 1000 x 700 x 3500 mm
The weight of the machine is 1100kg

Main configuration:

Name is internal volume remark
The load rack is high rigid and four columns 1
Drive system import ac servo motor and drive 1 set
Measurement and control, system CX-test full digital closed loop, multi-channel 1 set
The force transducer 1
Hand-held controller 1
The inner diameter deformation measurement system 1 set
Compression plate 620x310mm 1 set
Computer mainstream brand 1
1 set of random tools
Technical data sheet, packing list, certificate, service sheet 1 set
Testing machine software chengde vogji instrument manufacturing co., LTD

Important extension
WDW-20G 30G 50G 100G microcomputer control ring stiffness tester space 3 meters